Floor Systems

Phoenix Building Components offers Floor Systems that provide architectural versatility for the layout of your project. With greater spans than traditional floor framing and a variety of depths available the strength of engineered floors allow for better room placement without having to use support posts or bearing walls in inconvenient places. Find detailed information below and ask us about designing your home with a Phoenix Floor System.

Manufacturing:

  • Floor Trusses


Distribution:

  • I-Joist
  • TriForce Open Web
  • SIP’s
  • Timber frame

Floor Trusses

  • Computer automated saws with automated part cutting and labelling for accurate pre-cutting of materials
  • Laser guided framing projection for quality and accuracy
  • Custom built to exact length up to 36’ spans
  • Custom depths from 9-1/2” to 24”
  • We use only top quality 1650 and 2100 MSR rated 2×4 lumber for increased quality and design capacity
  • Receive as individual components or panelized
    – Pre-built sections of floor complete with all beams, rim, hangers, and floor sheathing assembled and ready to install
    – Floor sections up to 12’ wide x 32’ long
    – Sheathing is glued and screwed
  • Standard accessory products to complete floor system included
    – Beams (LVL, PSL, Glulam) around stairs and other openings
    – Mechanical connections where required (Hangers)
    – Rimboard (OSB or LSL) for lateral bracing
  • Optional accessory products to elevate your design solution
    – Heavy duty jack posts and column caps
    – LVL and PSL posts
    – Structural screws (Flat-Lok) for easy beam and truss laminations
  • 3D based modeling software to pre-build the structure in virtual space
    – Identifies possible issues and conflicts ahead of time
  • Mitek Sapphire
  • Viewing software available for customer and contractor review
  • Mitek Viewer (web link to download)
  • Considerations accounted for during design process
    – Point Loads from roof and other floor framing
    – Plumbing drains for toilets, bath tubs and showers
    – Vertical / Horizontal HVAC runs
  • Trusses are stacked and banded in site suitable bundles for safe handling and site organizing
  • Open-web design allows for easy offloading and handling with fork-lift or crane
  • Panels have pre-attached lifting straps for craning from truck right into place
  • Deliveries are made via drop deck, flatbed or roller trailers up to 53’
  • Component packages can be unloaded by customer or rolled-off
  • Numbered layouts and individual Engineer stamped truss/panel drawings are provided for installation
  • Job site package includes a wealth of information on proper safety and installation practices
  • Open-web design allows for easy installation of HVAC, Plumbing and Electrical with no cutting
  • Precision built to length eliminates on site cutting and reduces site waste
  • Longer clear spans allow greater design flexibility and reduced number of bearing walls
  • Custom end detailing can eliminate the need for hangers saving installation time on site
  • Larger nailing surface speeds up sub-floor installation
  • Panelized solutions save on time and labour, reducing framing times by up to 60% and also reducing the need for skilled trade workers

TriForce Open Web

  • OJ314 – 9-1/2”, 11-7/8”, 14”, and 16” depths / spans from 6’-16’
  • OJ315 – 11-7/8”, 14”, and 16” depths / spans from 18’-20’
  • OJ415 – 11-7/8” and 14” depths / spans from 20’-22’
  • OJ418 – 9-1/2”, 11-7/8”, 14”, and 16” depths / spans from 18’-26’
  • OJ420 – 16” depth / spans from 28’-30’
  • OSB end panel trimmable up to 24”
  • Receive as individual components or panelized!
    – Pre-built sections of floor complete with all beams, rim, hangers, and floor sheathing assembled and ready to install
    – Floor sections up to 12’ wide x 30’ long
    – Sheathing is glued and screwed
  • Standard accessory products to complete floor system included
    – Beams (LVL, PSL, Glulam) around stairs and other openings
    – Mechanical connections where required (Hangers)
    – Rimboard (OSB or LSL) for lateral bracing
  • Optional accessory products to elevate your design solution
    – Heavy duty jack posts and column caps
    – LVL and PSL posts
    – Structural screws (Flat-Lok) for easy beam laminations
  • All the convenience of Floor Trusses and I-Joist combined in to one!
    – Open-web design allows for easy installation of HVAC, Plumbing and Electrical with no cutting
    – Trimmable end allows for precise on-site fitting and adjustments
  • Longer clear spans allow greater design flexibility and reduced number of bearing walls
  • Larger nailing surface speeds up sub-floor installation
  • Panelized solutions save on time and labour, reducing framing times by up to 60% and also reducing the need for skilled trade workers
triforce-logo-v2

I-Joist:

  • PRI-40 – 9-1/2”, 11-7/8”, 14”, and 16” depths
  • PRI-60 – 9-1/2”, 11-7/8”, 14”, and 16” depths
  • PRI-80 – 9-1/2”, 11-7/8”, 14”, 16”, 18”, 20”, 22”, 24” depths
  • Design and span capabilities comply with APA-ADI rating standards
  • Supplied in 2’ increments up to lengths of 52’
  • Standard accessory products to complete roof system included
    – Beams (LVL, PSL, Glulam) around openings
    – Mechanical connections where required (Hangers)
  • Optional accessory products to elevate your design solution
    – Heavy duty jack posts and column caps
    – LVL and PSL posts
    – Structural screws (Flat-Lok) for easy beam laminations
  • Easy to handle, lighter weight per foot compared to conventional lumber
  • Longer clear spans allow greater design flexibility and reduced number of bearing walls
  • Larger nailing surface speeds up sheathing installation
  • Greater depth possibilities for enhanced insulation and ventilation performance
P3-logo
Structural Insulated Panels

SIP’S:

  • Made of exterior layers of 7/16” OSB skins with EPS foam core
  • Panel thickness – 8-1/4”, 9-1/4”, and 11-1/4”
  • Made to work with dimensional lumber (fits between exterior skins)
  • Panel sizes 4’x8’ up to 8’x24’ (jumbo panels)
  • CNC cut package provides “pre-cut ready to assemble panels”
  • Panels designed and pre-cut to fit in place around stair openings and timber frame posts
  • All accessories required for assembly are provided
    – Spray foam
    – Adhesive
    – Screws
  • Panels treated with borate to protect against fungus and insects
  • Custom Engineer stamped layouts and details for building permit application
  • All the convenience of Floor Trusses and I-Joist combined in to one!
    – Open-web design allows for easy installation of HVAC, Plumbing and Electrical with no cutting
    – Trimmable end allows for precise on-site fitting and adjustments
  • Longer clear spans allow greater design flexibility and reduced number of bearing walls
  • Larger nailing surface speeds up sub-floor installation
  • Panelized solutions save on time and labour, reducing framing times by up to 60% and also reducing the need for skilled trade workers

Heavy Timber

Timber Frame:

  • Materials – Solid Sawn Timber, Glulam, and Parallam (PSL)
  • Appearance grade and Structural grade
  • Wide variety of sizes and custom curved shapes
  • Custom Engineer stamped layouts and details for building permit application
  • Stronger and more durable
  • Structural and Architectural solution all in one
  • No other load bearing walls allows for increased design flexibility
  • Less jobsite waste
  • Increased fire protection
  • Uses less lumber than tradition stick framing reducing environmental impact
  • Increase energy efficiency when using SIPs as insulation

Start Your Project

Our products are sold through Retail Building Supply partners throughout Ontario and the Northeast US. If you can’t find a provider nearby, give us a call and we’ll work to bring our products closer to you!